- Possible to manufacture nano-powder on the spot if inserting the metal wire
- Possible to manufacture powders for all metals, alloys, and metal oxides
- Possible to produce nano-powder for high - melting point metals such as Tungsten (W)
- Possible to control the properties of powder to be manufactured by controlling the atmosphere in the chamber
- High energy efficiency due to the use of pulsed power
- Requires no post-treatment process for the removal of impurities due to an eco-friendly process with no by-products
- Optimized for commercial, research-related, and educational purposes due to a structure deigned for various kinds and in a small quantity
Product Specifications
Specification
NTi 30P
NTi 10P
Electric area
Input area
3-Phase 220VAC 20 A
Single Phase 220VAC 5 A
Output voltage
~25kV
~6.5kV
Power consumption
~ 1.5 kW
150W
Pulse energy
~ 700 J
~ 400 J
The number of pulses per minute
MAX. 40 times
MAX. 8 times
Cooling type
Air/Oil cooling
Air cooling
Dimensions(W×D×H)/mm
700×800×1500
Included in Mechanical part
Weight
340kg
Included in Mechanical part
Mechanical area
Input wire
Diameter 0.2 ~ 0.6 mm
Diameter 0.2 ~ 0.3 mm
Chamber type
Duplex Type
Duplex Type
Wire explosion type
50, 100mm
0~40mm
Cooling type
Water cooling
Water Cooling
Gas used
Nitrogen, argon, oxygen
Power sampling type
Trap, cyclone, filter
Dimensions(W×D×H)/mm
1500×600×1400
1320×510×1100
Weight
300kg
230kg
Option
Cooler, Vacuum Pump, Air Compressor, Dehumidifying Box
Cooler, Vacuum Pump, Air Compressor, Dehumidifying Box
Powder specifications
Yield (Cooper based)
50 g/hr
10g/hr
Average powder size
100nm
Possible kinds of powder
All conductive metals
* The specifications are subject to change without notice. The changes in specifications require detailed consultation.
X-ray technique, Spark Emission OES, Raman Spectrometer - RGS Corporation Sdn Bhd
