- Possible to manufacture nano- powders on the spot if inserting the metal wire
- Possible to manufacture powders for all metals, alloys, and metal oxides
- Possible to produce nano-powder for high - melting point metals such as Tungsten (W)
- Possible to control the properties of powder to be manufactured by controlling the atmosphere in the chamber
- High energy efficiency due to the use of pulsed power
- Easy mass production due to high-productivity, low-cost
- Requires no post-treatment process for the removal of impurities due to an eco-friendly process with no by-products
Product Specifications
Specifications
NTi-200P
Electric area
Input power
3-phase 220Vac 50A [max]
Output voltage
~28kV
Power consumption
~5kW
Pulse energy
~4kJ
Number of pulses per minute
~40 times
Cooling type
Air/Oil cooling
Dimensions (W×D×H)/mm
1100x1000x2000
Weight
550kg
Mechanical area
Input wire
Ø0.2~0.6
Chamber type
Duplex type
Wire explosion length
80, 140, 200mm
Cooling system
Water cooling
Gas used
Nitrogen, argon, oxygen
Powder sampling type
Trap, cyclone, filter
Dimensions (W×D×H)/mm
1800x900x2000
Weight
600kg
Option
Cooler, Vacuum Pump, Air Compressor, Dehumidifying Box
Powder specifications
Yield (Copper based )
350g/hr
Average powder size
100nm
Possible kinds of powder
All conductive metals
* The specifications are subject to change without notice. The changes in specifications require detailed consultation.
X-ray technique, Spark Emission OES, Raman Spectrometer - RGS Corporation Sdn Bhd
